Colorado - nowy firmware

[kwieto]

Pojawił się upgrade firmware (kolejna beta, tym razem 2.54) do Colorado.
Jest parę ciekawych poprawek, ja zamierzam dziś zaktualizować swój odiornik.

[koooza]

Wiadomo jakie zmiany wprowadzili , bo nie mogę tego znaleźć na stronie..

[kwieto]

Wiadomo jakie zmiany wprowadzili , bo nie mogę tego znaleźć na stronie..

* Added ability to turn elevation shading off, included in user profile settings
* Added ability to log a comment with geocaching Field Notes
* Added ability to save map selections to user profile settings
* Added compass setting to saved user profile settings
* Added tracback along current track
* Added ability to determine public land survey or USGS Quad name for Topo 24k HD cartography
* Added progress bar during software updates


* Improved odometer distance calculation
* Improved Wherigo engine
* Improved backlight behavior
* Improved compass / gps heading autoswitch behavior
* Improved keyboard behavior in address & intersection searches
* Improved behavior in low battery state
* Improved behavior of turn-by-turn route recalcuations
* Improved map drawing to eliminate redraws when not necessary
* Improved map drawing to reduce partial map draws
* Improved map drawing to enhance appearance of trails
* Improved usability of WGS84 by listing as a datum rather than just a spheroid
* Improved automatic track archiving when archiving very lengthy activity segments
* Increased maximum number of GPX files processed to 200
* Corrected guidance text to not truncate streets when not necessary
* Corrected behavior of proximity alarms in custom points of interest
* Corrected potential issues that prevented user alarm from sounding
* Corrected map drawing above 75 degrees latitude
* Corrected potential issue when attempting to delete profiles
* Corrected issue that generated extra waypoints at poweron when 'Mark Waypoint' was the first listed shortcut
* Corrected potential issue preventing 'Waypoints' from being listed in 'Where to?'
* Corrected issue that prevented poor signal strength messages from disappearing if a fix was achieved
* Corrected calculated issue that prevented complete display of large numbers
* Corrected specified schema path for GPX files
* Corrected Dutch keyboard to include 'Z' for address searches
* Corrected User Grid to retain settings between power cycles
* Corrected User Grid to allow 'E' and 'W' for longitude origin entry


---------------------


Nas z tego najbardziej interesuje to:
* Added ability to log a comment with geocaching Field Notes
(na pewno można te notatki przerzucić na GC, a chyba łyka je również GSAK.)

I być może to:
* Corrected specified schema path for GPX files

Natomiast ciekawe czy to:
* Improved automatic track archiving when archiving very lengthy activity segments

Jest zasługą mojej długaśnej korespondencji z supportem? :"P

Prócz tego parę rzeczy małych a cieszących, np. przypisanie wyboru map do profili oraz zrobienie tego samego z ustawieniami kompasu.

Naprawdę, robi się z tego urządzenia świetny odbiornik.
A jeśli kogoś to interesuje, na "Garniaku" jest (chyba) finisz moich kłopotów z zamrażaniem się odbiornika - winna okazała się jedna z map.

[Saracen]

beta 2.54 na pokładzie... zobaczymy co i jak...

[kwieto]

beta 2.54 na pokładzie... zobaczymy co i jak...

Field Notes działają tak, że nie można podejrzeć lub przeedytować notatki dodanej do cache'a. Za to można wpisać się do jednego cache parę razy i za każdym razem dodać notatkę - wszystkie notatki będą zapisane.

Informacje te dodawane są do pliku "geocache visits".

[Saracen]

Tym razem oficjalny, a nie beta.

• Changes made from version 2.50 to 2.60:
  
  * Added ability to turn elevation shading off, included in user profile settings
  * Added ability to log a comment with geocaching Field Notes
  * Added ability to save map selections to user profile settings
  * Added compass setting to saved user profile settings
  * Added tracback along current track
  * Added ability to determine public land survey or USGS Quad name for Topo 24k HD cartography
  * Added progress bar during software updates
  * Added error message when the max number of geocache or gpx files is exceeded
  * Added ability to search near a map point
  * Added ability to use the map to add a point to a route
  * Fixed shutdown when deleting a waypoint from the map
  * Improved odometer distance calculation
  * Improved Wherigo engine
  * Improved backlight behavior
  * Improved compass / GPS heading autoswitch behavior
  * Improved keyboard behavior in address & intersection searches
  * Improved behavior in low battery state
  * Improved behavior of turn-by-turn route recalculations
  * Improved map drawing to eliminate redraws when not necessary
  * Improved map drawing to reduce partial map draws
  * Improved map drawing to enhance appearance of trails
  * Improved usability of WGS84 by listing as a datum rather than just a spheroid
  * Improved automatic track archiving when archiving very lengthy activity segments
  * Improved button behavior when logging geocache attempt
  * Improved stopwatch timing
  * Improved distance precision when reviewing a point and tracks
  * Improved inter-tidal color in non-marine colors
  * Improved readability of geocache_visit.txt
  * Increased maximum number of GPX files processed to 200
  * Corrected guidance text to not truncate streets when not necessary
  * Corrected behavior of proximity alarms in custom points of interest
  * Corrected potential issues that prevented user alarm from sounding
  * Corrected map drawing above 75 degrees latitude
  * Corrected potential issue when attempting to delete profiles
  * Corrected issue that generated extra waypoints at poweron when 'Mark Waypoint' was the first listed shortcut
  * Corrected potential issue preventing 'Waypoints' from being listed in 'Where to?'
  * Corrected issue that prevented poor signal strength messages from disappearing if a fix was achieved
  * Corrected calculated issue that prevented complete display of large numbers
  * Corrected specified schema path for GPX files
  * Corrected Dutch keyboard to include 'Z' for address searches
  * Corrected User Grid to retain settings between power cycles
  * Corrected User Grid to allow 'E' and 'W' for longitude origin entry
  * Corrected shutdown issue when unit has empty Saved.gpx file
  * Corrected issue of missing active route when you select 'GO' from the full screen map in geocache mode
  * Corrected issue when selecting a custom poi from the recent found list after it is removed from the system
  * Corrected issue when selecting units on the stopwatch page using non-English languages
  * Corrected issue when you spell a geocache and the list doesn't reduce when the keyboard auto-pops
  * Corrected issue where you can't get to a hint for a geocache once you set it to found then back to unfound
  * Corrected issue where the chart information option would show up incorrectly
  * Corrected duplicate entries in the other menu when in page loop mode
  * Corrected external power lost message in non-English languages
  * Corrected issue with waypoint symbol selection shutdown
  * Corrected issue where the unit will hang when you try to restore a Wherigo cartridge
  * Corrected potential shutdown going to mass storage mode when you have custom POI's loaded
  * Corrected issues with Cyrillic characters

I pojawiły się nowe problemy: wiem jak skutecznie zamrozić kola na nowym firmware: wystarczy wejść: Dokąd? > Ślady> i... już u mnie działa w 100% przypadków...

[kwieto]

I pojawiły się nowe problemy: wiem jak skutecznie zamrozić kola na nowym firmware: wystarczy wejść: Dokąd? > Ślady> i... już u mnie działa w 100% przypadków...

Sprawdź przy języku ustawionym na angielski.
Nie masz przypadkiem "poprawionego" przez Frasuna pliku z polskim językiem?

[Saracen]

Sprawdź przy języku ustawionym na angielski.
Nie masz przypadkiem "poprawionego" przez Frasuna pliku z polskim językiem?

Nie, mam "nowy" polski, ten od Frasuna zdeponowałem na dysku, może się jeszcze przyda;-) ale to nie to: problem jest też na angielskim...

[kwieto]

No to reset i zobacz wtedy co się dzieje.
Ja w każdym razie nie mam takich problemów.

Używasz może mapy UMP ?
Jeśli tak - spróbuj wyłączyć. IMO to nie powinno być to, ale co szkodzi sprawdzić.

[Saracen]

UMP nie przeszkadza, za to reset pomógł... jak to czasem człowiek ma z myśleniem pod górkę

[kwieto]

UMP nie przeszkadza, za to reset pomógł... jak to czasem człowiek ma z myśleniem pod górkę

Nie wiem jak jest z innymi odbiornikami, natomiast z Colorado mam czasem wrażenie, że coś tam sobie zapisuje w jakiejś podręcznej pamięci i np. w przypadku padu baterii czy resetu niekoniecznie sobie tę pamięć czyści jak trzeba.

Ale od kiedy wyłapałem problem z mapą zawieszającą odbiornik, GPS chodzi "jak złoto" :")

Mogliby tylko zaimplementować do niego coś w stylu static navigation - oczywiście pod warunkiem możliwości indywidualnych ustawień.

[Saracen]

Po resecie znalazła się też zaprojektowana w MapSource trasa, a wcześniej jej nie widział... myślałem, że coś popierniczyłem, ale okazało się, że jednak nie...

[Saracen]

Nowy Firmware;-)
Colorado 400t software version 2.70
as of September 11, 2008

Change History
Changes made from version 2.60 to 2.70:

* Improved accuracy of altimeter for large altitude changes.
* Fixed text writing on top of itself in some geocaches descriptions.
* Fixed freeze when loading some geocaches descriptions.
* Fixed issues with power off pressure trending.
* Added support for downloading geocaches written using Groundspeak v1.1 extentions.
* Improved map drawing performance in some situations.
* Fixed 3D View not showing detail from supplemental maps.
* Fixed waypoint and geocache symbols not updating on the map after being changed.
* Fixed issue where the Colorado would temporarily stop responding after a spell search.
* Fixed issue with elevation over time plot.
* Fixed issue with position format not saving over power cycles.
* Fixed issue with display of selected location config field.

Zaraz zaczniemy testy;-)

[Saracen]

Kolejna aktualizacja:

Changes made from version 2.70 to 2.80:

* Fixed issue when marking waypoints in the W Malayan RSO position format.
* Added GDA94 and NAD83 datum support.
* Fixed importing gpx files from outside of the Garmin\GPX folder.

LINK

[woytas]

Saracen skad wziasc "polski" jezor dla colo? ja juz odliczam dni do przylotu mojej sztuki zza oceanu...